Cement Remover/Descale

Concentrated INHIBITED CHEMICAL CLEANER DISSOLVES SCALE-LIME MINERAL DEPOSITS POISON DANGER:CORROSIVE KEEP OUT OF REACH OF CHILDREN CONTAINS HYDROCHLORIC ACID May be fatal or harmful if swallowed. Do not breath vapor or fumes. Produces chemical burns. Do not get in eyes, on skin, or on clothing. ANTIDOTE: If swallowed call a physician immediately. Drink a spoonful or more of milk of magnesia, or a cup of soapy water followed with milk or raw egg whites. EYE CONTACT: Wash with water for 15 minutes. Get prompt medical attention. SKIN: Wipe off the acid gently, immediately flood the surface with water, using soap freely. Then cover with moist magnesia or baking soda.

A blend of improved acids and lightly effective inhibitors that give this product maximum safety and instant cleaning power. DE-SCALING AND DE-LIMING USES AND INSTRUCTIONS: Water Meters: Submerge parts to be cleaned in concentrate. Let parts soak until clean. Rinse thoroughly with water. De-scaling boilers: Blow down boiler. Use 1 part to 5 to 10 parts water, depending upon scale and speed required to perform the job. Allow to circulate until descaling is complete. Flush and rinse system thoroughly with fresh water. Also can be used for: cleaning and descaling Diffuser Tubes, high tension bolts, swimming pools, water lines, steam cleaners and motors. CONCRETE ETCHING AND CLEANING Quickly and easily removes vanadium stains, mortar deposits, and other extraneous materials. Especially effective in removing bordered cement that accumulates on all sorts of concrete and cement processing or trucking equipment. CONCRETE PROCESSING OR TRUCKING EQUIPMENT Mix with up to 5 pars of water in a plastic container, then spray plenty of solution so that surface is thoroughly soaked, let sit for a few minutes and agitate well with a stiff bristle brush. Rinse off with a power spray of clear water. MASONRY: Pre-wet masonry surfaces first with water for best results. Mix with up to six parts water in a plastic container, then apply freely with a stiff bristle brush. Let solution sit for a few minutes, scrape off hard to remove residue and then rinse well with water.