Kleen All Plus

"ALL YOUR CLEANING SUPPLIES UNDER ONE ROOF"

, .

 

476 68th STREET, BROOKLYN, NEW YORK 11220

Office 718-748-1550 Toll Free: (800) 537-9545. Fax: (718) 748-3425

www.kleenallplus.com                                              Info@kleenallplus.com

 

Kleen All Plus Material Safety Data Sheet

 

IDENTITY: #923, Mold and Mildew Cleaner

 

SECTION I

Manufacturer Name:

Address

 

Emergency Telephone Number

Telephone Number For Information

Date Prepared:

Prepared by:

Kleen All Plus

476 68th Street

Brooklyn, NY 11220

1-800-537-9545

1-800-537-9545

June 2006

Staff

 

 

SECTION II - HAZARDOUS INGREDIENTS IDENTITY INFORMATION

Hazardous Components

OSHA PEL

ACGIH TLV

OTHER LIMITS

PERCENT OPTIONAL

Ethyl Alcohol, Denatured

CAS# 64-17-5

1000 ppm

1000 ppm

 

< 0.10%

 

SECTION III - PHYSICAL/CHEMICAL CHARACTERISTICS

Boiling Point   212 deg. F

Vapor Pressure (mm Hg)… NA

Vapor Density (air=1 )…>1

Solubility in water…Complete

Appearance and Odor: Green liquid, Mint odor.

Specific Gravity.(H20=1) >1

Melting Point: NA

Evaporation Rate…: <1

(Ethyl Ether=1)

 

SECTION IV - FIRE AND EXPLOSION HAZARD

Flash Point (Method Used): > 200 Deg F.     Flammable limits:                    LEL:                UEL:

Extinguishing Media: Dry chemical, carbon dioxide, foam, or water fog.

Special Fire Fighting Procedures: Self contained breathing apparatus and protective clothing

Unusual Fire and Explosion Hazards: None.


 



Kleen All Plus

"ALL YOUR CLEANING SUPPLIES UNDER ONE ROOF"

, .

 

476 68th STREET, BROOKLYN, NEW YORK 11220

Office 718-748-1550 Toll Free: (800) 537-9545. Fax: (718) 748-3425

www.kleenallplus.com                                              Info@kleenallplus.com

 

SECTION V #923 Page 2

Stability: Unstable [ ] Stable [X]

Conditions to Avoid: Stable under normal storage/use conditions.  Avoid mixing with unknown chemicals.

Incompatibility (materials to avoid): Strong oxidizing agents.

Hazardous Decomposition or Byproducts: Nitrous oxides and ammoniacal vapors.

Hazardous Polymerization May occur [ ]       Will not occur [X]

 

SECTION VI . Health Hazard Data

Route(s) of entry         Inhalation?  Yes          Skin?  Yes       Ingestion?  Yes

Health Hazards(Acute and Chronic): Contact with eyes is painful and irritating.  Prolonged and repeated skin contact may cause irritation.  Inhalation may irritate nasal passages.  Prolonged inhalation may cause nausea, disorientation.  Chronic effects have not been established.

 

Carcinogenicity:          NTP?  No        (ARC Monographs)?  No       OSHA Regulated? No

 

Medical Conditions Generally Aggravated by Exposure: None established.

 

Emergency and First Aid Procedures: Eyes and skin – Flush with water.  See physician if irritation persists.  Inhalation – Remove to fresh air.  Give oxygen or artificial respiration if necessary.  Ingestion – get immediate medical attention.

 

SECTION VII . Precautions for Safe Handling and Use

Steps to Be Taken In Case Material is Released or Spilled: Contain all leaks and spills to prevent discharge into the environment.  Ventilate area.  Soak up with absorbent, shovel into waste container.  Flush area with water.

 

Waste Disposal Method: Material collected with absorbent may be disposed in a permitted landfill according to federal, state and local authorities only.

 

Precautions For Storing and Handling: Keep from freezing.

 

Other Precautions: Do not contaminate with foreign chemicals.

 

SECTION VIII - Control Measures

Respiratory Protection (Specify Type): A NIOSH/MSHA jointly approved respirator is advised in the absence of proper environmental controls of if TLV for ethyl alcohol is exceeded.

Ventilation

Local Exhaust: Normal

Special:

 

Mechanical:

Other

Protective Gloves: Impervious

Eye Protection: Splash goggles, eyewash should be accessible.

Other Protective Clothing or Equipment: Wear protective clothing if splashing should occur.

Work Hygienic Practices: Wash thoroughly after handling. Launder contaminated clothing before reuse.